CO2 Gadget features a comprehensive, consistent menu system that works both on the meter’s display and via the serial port (USB). What you see on the display is shown on the serial terminal, and vice versa, simultaneously. This means you can configure your meter even if it has no display or buttons, using just a programme … Read more
The Sensirion MyAmbiance app (free, iOS and Android) is the perfect companion for your Gadget CO₂ meter: it lets you view real-time readings via Bluetooth, configure the Wi-Fi without touching the board, and use your mobile as a secondary display. Using the monitor couldn’t be simpler: switch it on, open the app on … Read more
BTHome v2 is an open BLE beacon protocol that Home Assistant detects automatically: with your Gadget CO₂ sensor transmitting via Bluetooth, Home Assistant creates the entities without the need for Wi-Fi, MQTT or manual configuration. The CO2 Gadget supports 10 measurements (CO₂, temperature, humidity, battery, PM2.5, pressure, PM10, voltage, PM1.0 and PM4.0), AES-CCM encryption and coexistence with … Read more
Gadget’s BLE CO₂ Guide. Connect your high-quality CO₂ monitor to the Sensirion MyAmbiance app: real-time data, downloadable history, Wi-Fi setup via Bluetooth and calibration.
Complete guide to installing CO2 Gadget. One-click web installer, table of 13 boards with ‘INSTALL’, binary downloads, compilation with PlatformIO and troubleshooting.
Gadget’s Low-CO₂ Guide. Get up to 3 months’ battery life from your high-quality CO₂ monitor: HIGH_PERFORMANCE and LOW_POWER modes, configurable deep sleep, battery management and wake-on-alert.
ESP-NOW Guide for CO2 Gadget. Long-range communication for your high-quality CO₂ sensor: configure peer MAC, Board ID, transmission interval and MQTT gateway.
